NameSilo

2 hdds?

SpaceshipSpaceship
SpaceshipSpaceship
NamecheapNamecheap
Watch

PoorDoggie

Soon to be RICHdoggie!VIP Member
Impact
18
Hi. I have looked on the internet, but I seem to get really obscure results!

I want to connect my 2 hard drives up in I think it is "raid" so that Windows thinks it is just 1 hard drive. I don't want a mirror hard drive, you know the ones where everything you save gets saved again on the other hard drive as a backup.

Ie: I have am 80gb drive in ATM, and I did have SuSE linux on my 20gb one, but I found I never used it. I have (eventually) deleted that disk, but now I have 2 windows boot options. I don't want this, I want 1 windows partition spread accross 2 hard drives.

I thought I would ask my friendly online community for help here: I would like to know what this is called so I can find a tutorial on the internet. I think it is called "raid" but I am not sure. Is there a specific term for this?

Thanks a lot in advance
Tom :):):)
 
0
Close
The views expressed on this page by users and staff are their own, not those of NamePros.
GoDaddyGoDaddy
Ok, is there any way to create 1 partition over 2 hard drives?

Thanks
Tom
 
0
Close
With a RAID setup your data would be written to both hard drives simultaneously. So with two 80 GB drives, you could still only store 80 GB data. RAID is used for backup purposes.

I've never seen two hard drives partitioned as one drive, or even know if that's possible with Windows. You'd definately need some kind of special software to do this. If I find anything that is helpful I'll be sure to post.
 
0
Close
I am not sure if this is what you mean, but I have 2 hd's installed running on 1 operating system. The 2nd hd allows me to save stuff to it and stuff and programs can be installed on it. It is also quite easy to do, if you need help (and if it is this what you mean) then I can give you some advice.
 
0
Close
I think what Doggie wants to do is have two drives that both act as the C:\ drive, instead of giving the second drive a new letter. I wasn't able to find anthing that would help. My guess is that this is impossible.
 
0
Close
I had 2 old one's connected at one time but it was just "Sharing" the Drives more or less - Only had control of one system ... I believe it was just a USB patch cable or something .... Probably not what you're talking about doing though - (BTW - I'm talking win95 times .... :bah: )
 
0
Close
It depends what RAID level you have setup, as to how it would work. For example, RAID 0 is a striped disk array which provides data striping (what you want), RAID 1 is mirroring, etc.
 
0
Close
Personally I would reccomend that you keep the two hard drives seperate. Here is what I do on my computer.

HD #1: On this HD I install windows. I also install all of the programs that I run on a daily basis. This hard drives only holds installed programms basically.

HD #2: I use this hard drive for all of my data files (music, install files, pics, etc.). I do not install ANYTHING on this hard drive at all.

This setup works wonders when you have to reformat your computer. All you do is format the hard drive with all your installed stuff on it, then reinstall everything from your data hard drive.
 
0
Close
joeorgasmic said:
Personally I would reccomend that you keep the two hard drives seperate. Here is what I do on my computer.

HD #1: On this HD I install windows. I also install all of the programs that I run on a daily basis. This hard drives only holds installed programms basically.

HD #2: I use this hard drive for all of my data files (music, install files, pics, etc.). I do not install ANYTHING on this hard drive at all.

This setup works wonders when you have to reformat your computer. All you do is format the hard drive with all your installed stuff on it, then reinstall everything from your data hard drive.
thats really clever, unfortunately, this is not what I want

ATM, I have 2 drives and I wanted them to be recognised as 1. Not necessarily in My computer, but so that lets say I am using photoshop, and I save an image, I don't have to navigate to whicheve hdd I want to use.

It would nice if evrything would recognise the two as 1 hdd but I'm not fussy! I have heard that this is possible with raid:
scott said:
It depends what RAID level you have setup, as to how it would work. For example, RAID 0 is a striped disk array which provides data striping (what you want), RAID 1 is mirroring, etc.
RAID 0? What does data stripping acctually do?

I just hate having 2 hard drives, and 2 root drives and stuff. I might try that thing joe did if it is not possible to do what I want.
 
0
Close
joeorgasmic said:
Personally I would reccomend that you keep the two hard drives seperate. Here is what I do on my computer.

HD #1: On this HD I install windows. I also install all of the programs that I run on a daily basis. This hard drives only holds installed programms basically.

HD #2: I use this hard drive for all of my data files (music, install files, pics, etc.). I do not install ANYTHING on this hard drive at all.

This setup works wonders when you have to reformat your computer. All you do is format the hard drive with all your installed stuff on it, then reinstall everything from your data hard drive.


wow, i never thought of it that way :P

i have my setup similar to that, but never thought of that reformat bonus :P
 
0
Close
joeorgasmic said:
Personally I would reccomend that you keep the two hard drives seperate. Here is what I do on my computer.

HD #1: On this HD I install windows. I also install all of the programs that I run on a daily basis. This hard drives only holds installed programms basically.

HD #2: I use this hard drive for all of my data files (music, install files, pics, etc.). I do not install ANYTHING on this hard drive at all.

This setup works wonders when you have to reformat your computer. All you do is format the hard drive with all your installed stuff on it, then reinstall everything from your data hard drive.
I think I will do this... anyone give any advice on which hdd I should use for which function? I have a 20gb hdd and a 80gb hdd... which should I use for installations and which one for storage?

Thanks
Tom
 
0
Close
i used to run a jbod array

was great, system booted in about ~20 secs until the array died and i lost it and then went back to 2 sperate disks.
 
0
Close
hey, joeorgasmic? which takes up more space? the storage, or the installed files?
 
0
Close
It depends on what kind of files you keep. For me, my data HD is bigger because I have about 20 gigs of music on it.

I think I will do this... anyone give any advice on which hdd I should use for which function? I have a 20gb hdd and a 80gb hdd... which should I use for installations and which one for storage?

If you plan on keeping large data files, make the 80 gb you data HD. On the other hand, if you install some very large scale games and dont keep a lot of data files, make your main HD your 80 gb.
 
0
Close
hmm... will have to think about it. My installations are not that big and I don't think that I have that many either. As for files, this is the computer I do most of my developing and programming on. So I have loads of graphics and documents and files and music (to keep me going). So I think the 80gb drive should be the storage!

Thanks a lot :)
 
0
Close
No problem at all man. If you have any more questions just shoot me over a pm.
 
0
Close
AIVikingsAIVikings

We're social

Escrow.com
Spaceship
Domain Recover
CryptoExchange.com

NamePros updates

Filters for activity feeds
Your news feed, Latest activity, and the activity tab on profiles now have filter buttons: All, Posts, Quick replies, and Other. Your...
AIVikings
Catchy
  • The sidebar remains visible by scrolling at a speed relative to the page’s height.
Back